USB Spectrum Analyzer

SPECTRAN V4 X

9kHz - 9,4GHz | ST 1mS

Shop now

Our latest V4 generation offer a vastly enhanced feature set with significantly faster sample time, more dynamic range, better IP3, reduced phase noise and greater demodulation bandwidth compared to the previous V3 series. The V4 flagship HF-60100 V4 is suitable for Pre-Compliance and EMC/EMI tests.

USB Spektrumanalysator SPECTRAN V4 X

Patented technology:
Based on a patented spectrum analyzer method Aaronia can offer a professional RF measurement at a spectacular price level.
Detect sources of interference, find out more about their causes, determine the frequency and intensity of the signal sources, measure limits and boost the functionality by using our high-end PC software.

Made in Germany:
All SPECTRANs are developed, individually produced and calibrated in Germany at the Aaronia factory. This guarantees highest standard so that Aaronia can offer every customer a full 10 years warranty for all SPECTRAN spectrum analyzers and EMC antennas.



Versions
Type and Frequency Range Price
HF-6060 V4
10MHz - 6GHz
from 999,95€
Buy now!
HF-6080 V4
10MHz - 8GHz
from 1298,00€
Buy now!
HF-60100 V4
9kHz* - 9,4GHz
from 1498,00€
Buy now!
Datasheet Type Frequency Range Price
HF-6060 V410MHz - 6GHzfrom 999,95€Buy now!
HF-6080 V410MHz - 8GHzfrom 1298,00€Buy now!
HF-60100 V49kHz* - 9,4GHzfrom 1498,00€Buy now!

Features
  •  Exposure limit calculation and display according to DIN/VDE 0848
  •  Up to 100x faster sample time than V3 units
  •  Up to 80dB higher sensitivity than V3 units
  •  14Bit Dual-ADC
  •  DDC Hardware-Filter
  •  150 MIPS DSP (CPU)
  •  Thick aluminum housing with good screening
  •  Inc. OmniLOG Antenna
  •  Free MacOS, Linux and Windows software
Software

The MCS Software transforms any SPECTRAN into a powerful measurement solution with real-time remote control via USB and great features (e.g. recording, multiple window display, histogram, waterfall diagram, unlimited number of markers, enhanced limits display etc.).

Spektrumanalysator Software MCS
Applications

    Warning: Use of undefined constant appls - assumed 'appls' (this will throw an Error in a future version of PHP) in /kunden/514421_54597/webseiten/aaronia-dev.com/wp-content/themes/not-zerif/template-info.php on line 506
  •  Pre-Compliance-Test
  •  Radio & TV
  •  TETRA
  •  ISM434
  •  LTE800
  •  ISM868
  •  GSM900
  •  GSM1800
  •  GSM1900
  •  DECT
  •  UMTS
  •  WLAN
  •  Microwave
  •  Bluetooth
  •  LTE2.6
  •  5GHz WLAN
Photos
Downloads
[Download not found] [v.[Download not found]]
[Download not found] [v.[Download not found]]
[Download not found] [v.[Download not found]]
[Download not found] [v.[Download not found]]
[Download not found] [v.[Download not found]]
[Download not found] [v.[Download not found]]
[Download not found] [v.[Download not found]]
[Download not found] [v.[Download not found]]
[Download not found] [v.[Download not found]]
[Download not found] [v.[Download not found]]
[Download not found] [v.[Download not found]]
[Download not found] [v.[Download not found]]




Specifications
 HF-6060 V4 XHF-6080 V4 XHF-60100 V4 X
Frequency Range (min)10MHz10MHz9kHz (Option 900) /
1MHz (Standard)
Frequency Range (max)6GHz8GHz9,4GHz
Optional PEAK Power-Detector (Maximum usable frequency)6GHz8GHz10GHz
DANL (Displayed Average Noise Level)-135dBm(1Hz)-145dBm(1Hz)-155dBm(1Hz)
DANL (Displayed Average Noise Level) with Preamp (Option 020, 321)-150dBm(1Hz)-160dBm(1Hz)-170dBm(1Hz)
Max. Power at RF-Input+10dBm+20dBm (Standard) /
+40dBm (SMA Attenuator)
Resolution Bandwidth
(RBW) (min)
10kHz3kHz200Hz
Resolution Bandwidth (RBW) (max)50MHz
EMC Filter 200Hz, 9kHz, 120kHz, 200kHz, 1,5MHz, 5MHzNoYes
DemodulatorAM/FMAM/FM/PMAM/FM/PM/GSM
DetectorRMS/MinMax
Units dBm, dBµV, V/m, A/m, W/m² (dBµV/m etc. via PC software)Yes
SampleTime10mS1mS
Accuracy (typ.)+/-2dB+/-1dB






Options
Option 002: 0,5PPM TCXO timebase
This highly precise TCXO timebase, which has been especially developed for the SPECTRAN®, offers significantly reduced phase noise (jitter). This will allow the use of far narrower filters (in development), which will in turn vastly enhance sensitivity. To fully exploit the maximum sensitivity of the HF-60100 V4, this option is indispensable! Furthermore, the TCXO timebase allows far more accurate frequency measurement and display and is therefore a MUST-HAVE for future applications like time-domain measurements or code-selective measurement of UMTS, all already in development. The standard accuracy without option 002 is 50ppm.
+ 199.95€
Option 015: Audio Signal Tracker
The Option 015 provides an accoustic representation of the signal intensity, similar to a Geiger counter. This allows a fast and convenient localization of the signal source. Perfectly suitable for signal direction finding, finding hidden transmitters or aligning antennas, especially in combination with the Peak Power Meter (Option 20x). As a highlight, the dynamic can be adapted optimally by moving the reference level.
+ 99.95€
Option 020: Internal 15dB low-noise preamplifier
This option provides an internal, super low-noise 15dB preamplifier, enabling maximum performance particularly when measuring extremely weak signals. It is switched via a TRUE RF switch. There really is no excuse for not ordering this one, considering its very attractive price! The maximum sensitivity of the V4 series without option 020 is lower by 15dB.
+ 99.95€
Option 2xx: 6GHz / 8GHz / 10GHz peak power meter
A 6 to 10GHz peak power meter (3 versions depending on the SPECTRAN® model, see our price list). This option augments your SPECTRAN® with a power meter with up to 10GHz of bandwidth. Furthermore, it allows exact measurement of signal peaks with high crest factor like those occuring in WLAN technology, or extremely short signals, like RADAR bursts. What's more, measurement is performed in REAL TIME and BROADBAND, while at the same time being temperature-compensated. It is also an ideal solution for measurement of cable attenuation or receiver output. Depending on the actual frequency, the power meter provides a sensitivity of up to approx. -50dBm, while the maximum permissible level is +10dBm. By adding our 20dB attenuator (see price list), the maximum measurable signal level can be enhanced to +30dBm or +50dBm!
+ 99.95 - 249,95€
Option 800: Sensitivity Extension (from 8GHz - 10dB)
Internal hardware upgrade to increase the sensitivity (lower noise floor) of the HF-60100 V4 by an average of 10dB (max. 15dB) between 8GHz and 9.4GHz. Produces slightly higher noise at 1GHz, not recommended for EN tests without UBBV2 preamplifier.
+ 499,95€
Option 900: 9kHz Frequency Extension
Extends the start frequency of the SPECTRAN HF-60100 V4 to 9 kHz. The new, usable frequency range with Option 900 is 9kHz - 9.4 GHz. Perfect for the measurement of conducted emissions according to interference standards such as EN55015, EN61800-3 etc.
+ 499,95€
Preamplifier
Preamplifiers (1Hz - 20GHz)
The UBBV series are battery powered preamplifiers, that are compatible to all brands of spectrum analyzers and fit directly on the Aaronia SPECTRAN Handheld analyzer series. Eight different versions cover a frequency range from DC up to 20GHz and offer gain of up to 40dB with very low noise, with and without by-pass functionality. The accurate and specific calibration data of every UBBV preamplifier are saved internally and can be read out via USB.
from 499,95€ Shop
Antennas
Logper Antennas
The HyperLOGs are Aaronia's world-renowned series of high-qualty log-periodic antennas with an extended frequency range of up to 35GHz. An unrivaled bandwidth combined with high directionality and the high gain are the key ingredients for the success of theses antennas. The HyperLOG series is available as active or passive variants.
from 199,95€ Shop
Biconical Antennas
Available as active or passive antennas, the BicoLOGs are the answer when and where ever a biconical antenna is needed. Calibrated starting at 20MHz up to 3GHz, they transform any normal spectrum analyzer into an EMC measurement device for pre-compliance testing.
from 499,95€ Shop
Probes
The Aaronia Probe-Sets are compatible with any spectrum analyzer and enable the pinpoint measurement of interferences from DC up to 9GHz. The delivery scope includes conversion tables and a conversion app, detailed calibration data, 40dB pre-amplifier (PBS 2 only) and a 1m cable. The sets are perfect for the locating of interference sources, measurement of interference field strenghts, injecting fields into circuits to identify those which are EMC-susceptible and the testing of screening and filtering solutions. The sniffer probe sets include a total of 5 EMC probes.
from 1498,-€ Shop
Omnidirectional Antennas
The OmniLOG series was developed as a cost-effective broadband antenna series for omni-directional measurements up to 8GHz. The antennas are small in size, cover frequencies from 300MHz up to 8GHz and have steady gain across the range. Compared to the HyperLOG series, the OmniLOG antennas enables the omni-directional measurement of field-strengths without having to point the antenna at the source. This allows for much faster threshold measurements.
from 99,95€ Shop
Horn Antennas
The horn antennas of the PowerLOG series impress through their high input power (up to 500W) and gain of up to 20dBi. The delivery scope of the antennas include a detailed, specific calibration certificate and they can be used for EMC tests, RF emissions measurements and signal transmission. The very wide frequency range from 700MHz up to 40GHz can be covered by the use of only two antennas of this series.
from 1798,-€ Shop
Magnetic Field Antennas
The MDF and Magnotracker series are Aaronia's high quality magnetic field tracking antennas for signal localization and field strength measurements starting from 1Hz. Available in 8 different versions (2 passive, 6 active), the Aaronia magnetic field trackers cover an extremely broad band of frequencies - from 1Hz up to 400MHz.
from 299,95€ Shop
Accessories
20dB SMA Attenuator
Expands the measurement range from +20dBm to +40dBm.
+ 149,95€ Shop
1m, 5m or 10m Low Loss SMA Cable
This high-grade SMA cable can be used to connect Aaronia HyperLOG EMC antennas to Aaronia Spectran RF spectrum analysers with very low damping (signal loss). Available in lengths of: 1 Metre, 5 Metres, 10 Metres.
+ 29,95€ - 109,95€ Shop
DC-Blocker (SMA)
The DC-Blocker must be used if you want to measure active powered antennas like GPS or satellite dishes. It prevents the RF-input of the SPECTRAN from being destroyed by the DC-voltages. Simply connect the DC-Blocker to the RF-input of your SPECTRAN and you can measure directly on GPS, satellite antennas or even DSL/ISDN etc. lines.
+ 99,95€ Shop
Calibration Certificate
Calibration Certificate for HF and NF Spectrum Analyzer. We recommend to recalibrate the Spectran Analyzers each year.
+ 199.95€ Shop
Spectran USB Cable
To connect your SPECTRAN to the PC. Special version with high performance EMC-ferrite.
+ 19,95€ Shop
3000mAh LiPo Battery
Offers a MUCH higher runtime of the SPECTRAN (up to 400%).  Strongly recommended for autonomic measurement! The 1300mAh standard-battery will be replaced.
+ 99,95€ Shop
Frequency Overview

^

Durch die weitere Nutzung der Seite stimmst du der Verwendung von Cookies zu. Weitere Informationen

Die Cookie-Einstellungen auf dieser Website sind auf "Cookies zulassen" eingestellt, um das beste Surferlebnis zu ermöglichen. Wenn du diese Website ohne Änderung der Cookie-Einstellungen verwendest oder auf "Akzeptieren" klickst, erklärst du sich damit einverstanden.

Schließen