Rugged Real-Time Spectrum Analyzer

SPECTRAN V5 XFR Pro

1Hz-20GHz | 175MHz RTBW

Get a Quote

The SPECTRAN V5 XFR Pro is the world’s first and only military standard real-time spectrum analyzer. The XFR Pro offers all the advantages of a rugged Laptop and combines these with a powerful real-time spectrum analyzer. Developed and built for extreme conditions and independently MIL-STD-810G and IP65 tested.

Robuster Echtzeit-Spektrumanalysator SPECTRAN V5 XFR Pro

The V5 XFR offers up to 175MHz real-time bandwidth in the frequency range from 1Hz up to 20GHz. The device can be also used as a powerful laptop. Perfectly suited for frequency-monitoring and the detection of unknown or illegal signal transmissions.

Highlights
• Frequency range from 1Hz up to 20GHz (with low frequency option)
• Real-time bandwidth of up to 175MHz
• MIL-STD-810G and IP65 certified
• Up to 8 TB SSD (Hard Disk / Storage)
• Automatic Triggers programmable
• Simultaneous surveillance of multiple bands (3G, 4G, WLAN...)
• Real-time and sweep spectrum analyzer in one
• Including software with daily updates
• 20GHz Sweep in 20ms
• Built-in GPS
• HF Connector N-female

Counter-Surveillance
The SPECTRAN V5 XFR Pro was specifically developed for counter-surveillance. The spectrum analyzer, in combination with the RTSA Suite Software, makes it possible to monitor multiple bands in real-time. It can also trigger an alarm when any suspicious activity occurs – for example in the bands 2G, 3G, 4G, LTE, WLAN 2,4 or 5,8. Alternatively, the XFR Pro can use the super quick sweep to scan the complete band from 9kHz to 20GHz. This way any interferers, tracking or listening devices can be found and dealt with quickly (with the help of a directional antenna).

It is possible to use the V5 XFR in a stealthier manner – with the display closed – and still record signals and get a warning tone through the audio output or the integrated speakers, if any of the automatic triggers are activated. It is also possible to demodulate audio signal transmissions, if you want to monitor wireless communication.

Rugged
This spectrum analyzer was independently MIL-STD-810G and IP65 tested. The casing is made from a high-quality magnesium alloy and was specifically designed and developed to protect the analyzer against drops, shocks, spills, vibration and more. The sealed design of the XFR additionally protects it against dust and moisture. This enables the spectrum analyzer to be used in the harshest, most difficult conditions – like jungles, deserts or a polar circle. The V5 XFR Pro can be used at temperatures from -20°C up to +60°C.

Laptop Highlights
• Powerful i7 Processor
• 8GB RAM
• nVidia Geforce GT 745M
• 500GB HDD (optional up to 8TB SSD)
• 15,6” Full-HD 1080p with Multi-Touch
• Removable hard-drive
• Fingerprint Sensor

Laptop
The V5 XFR Pro is not only a powerful spectrum analyzer, but also a high-performance laptop. The system can be used as a normal Windows-PC. This means that no additional laptop/notebook/tablet is required for computer-based work on-location.

Options / Accessories
• Powermeter 20GHz / 40GHz
• 5ppb (0,005ppm) OCXO Time-Base
• 1Hz Low-Frequency-Extension
Fitting Preamplifiers, 8 different versions (up to 20GHz)
Great selection of Aaronia antennas
• Optional second battery (hot-swap-system)

Software
The SPECTRAN V5 can be used together with the new, free and included in the delivery RTSA Suite Software via USB 2.0. The RTSA is one of the most powerful and flexible spectrum analysis software-solutions on the market. The software gives you the ability to display and analyze signals in real-time in many different ways. It is under constant development, with many new features being added over time. Daily updates can be found in our download-section.

Made in Germany
Like all devices of the SPECTRAN series, the SPECTRAN V5 XFR spectrum analyzer is developed and assembled in Germany, guaranteeing the highest quality standards.



Versions
Type and Frequency Range Price
V5 XFR Pro
9kHz (1Hz*) - 20GHz
Get a quote!
Buy now!
Datasheet Type Frequency Range RTBW Price
V5 XFR Pro9kHz (1Hz*) - 20GHz88MHzGet a quote!Buy now!

Features
  •  Frequency Range from 1Hz up to 20GHz
  •  Up to 175MHz Real-Time Bandwidth
  •  Perfect for counter-surveillance, f.e. detection of bugs
  •  POI under 1μS
  •  MIL-STD-810G and IP65 certified
  •  Up to 8 TB SSD (Hard Disk / Storage)
  •  Automatic Triggers programmable
  •  Patented Polyphase Filter Technology
  •  Simultaneous surveillance of multiple bands (3G, 4G, WLAN...)
  •  Real-time and sweep spectrum analyzer in one
  •  Very fast sweep mode, scans 20GHz in less than 20mS
  •  Incl. "RTSA Suite" Software
Software

With the RTSA Suite PRO there are many ways to display and analyse any received or recorded data. The software is being updated and expanded with new features almost daily.

Echtzeit-Spektrumanalysator Software RTSA Suite
Photos

Videos

V5 now offering 175MHz RTBW!

V5 analyzing a DECT phone spectrum

V5 measuring and decoding a car key

More Videos >>





Specifications
 V5 XFR Pro
Frequency Range (min)1Hz (Option 003) / 9kHz (Standard)
Frequency Range (max)20GHz
Real-Time Bandwidth 88MHz (Standard) /
160/175MHz (Option 160)
Min. Event Duration for 100% POI<1µS
Max. Power at RF input (50 Ohm)+20dBm (Standard) / +33dBm (SMA Attenuator)
DANL (internal pre-amp on)typ. -150dBm/Hz
DANL (with external pre-amp)max. -170dBm/Hz
Amplitude accuracy (typ.)typ. +/- 1,5dB
RF input 50 Ohm (SMA-connector)
Frequency reference accuracy0,5ppm (Standard) / 5ppb (Option 002)
RBW (resolution bandwidth) 1Hz to 3MHz
VBW (video bandwidth)1Hz to 3MHz
DemodulatorAM, FM
Measurement UnitsdBm, dBµV, V/m, A/m, W/m², dBµV/m, W/cm²
DetectorMin, Max, AVG, Peak, QPeak (in preparation)
Attenuator range45dB (0,5dB steps, incl. pre-amp)
TracesACT, AVG, MAX, MIN
Reference range-200dBm to 100dBm
Measurement modesI/Q, Power/Frequency Data
ViewsSpectrum, Persistence Spectrum, Spectrogram / Waterfall, Histogram
GPSBuilt-in GPS
TriggerCursor, Measurement, Density
Video RAM64 MB
SDRAM256 MB
ADC500MSPS 14Bit
FPGA240K ECP3
DSP (Dual Core Blackfin)600 MHz
Temperature Range (Operation) -20 °C to +60 °C
Temperature Range (Storage)-40 °C to +71 °C
Humidity95% relative humidity, non-condensing
Laptop Specs
CPUIntel Haswell i7-4600M
RAM8GB
HDD500GB, 7200RPM (optional SSD up to 8TB)
Operating SystemWindows 7
Display15,6“ Full-HD 1080p with Multi-touch screen, sunlight readable (800 Nits Quadra-Clear)
Graphics CardnVidia Geforce GT 745M
BatteryIntelligent lithium ion battery with 8700mAh (optional second battery, hot swap system)
KeypadMembrane keyboard with integrated numeric keypad and LED backlight
Connectors2x PCMCIA Type II, 1x ExpressCard/54, 1 x Smart Card Reader I/O interface: 2x Serial port (9-pin, D -Sub), 1x External VGA port (15-pin, D -Sub), 1x microphone, 1x audio output (mini-jack), 1x DC input, 2x USB 3.0, 2x USB 2.0, 1x USB 2.0 / eSATA combo, 2x LAN (RJ45), 1x HDMI, 1x docking connector (80 - pin)
Interfaces10/100/1000 BASE -T Ethernet Intel Centrino Advanced-N 6200, 802.11 a/b/g/n, GPS module + Tri - Passtrough
Safety FeaturesIntel vPro technology, TPM1.2, fingerprint scanner, smart card reader, Kensington Lock
CertificationMIL -STD- 810G, IP65, MIL -STD- 461F, magnesium alloy casing, shock-proof removable hard disk
Dimensions410 x 315 x 120mm
Weight7,5 kg
Power SupplyAC Input: 100-240V, 50-60Hz DC Output: 19V, 4,74A max.
Power Consumption< 90W
Country of OriginGermany
Recommended Calibration Interval2 years






Options
Option 020: Internal 20dB Low-Noise Pre-Amplifier
This option provides an internal, super low-noise 20dB Pre-Amplifier, enabling maximum performance particularly when measuring extremely weak signals. It is switched via a true RF switch.
In the scope of delivery
Option 002: 5ppb (0,005ppm) OCXO Timebase
This highly precise OCXO timebase, which has been especially developed for the SPECTRAN®, offers significantly reduced phase noise (jitter). This will allow the use of far narrower filters, which will in turn vastly enhance sensitivity. To fully exploit the maximum sensitivity this option is indispensable! Furthermore, the OCXO timebase allows far more accurate frequency measurement and display.
+ 999,95€
Option 003*: Low Frequency Extension (starting at 1Hz)
Extension of the low frequency range to 1Hz. The input signal is internally diverted to a second RF- path, which is optimised for low frequency processing. The low frequency path offers a frequency range from 1Hz up to 40MHz. This path uses a high-performance 16Bit AD converter with 105MSPS. This resolution enhancement from 14Bit to 16Bit improves the dynamic range from 80dB (14Bit) to 100dB (16Bit), which leaves nothing to be desired. This path is a fully capable Real-Time function controllable by µS DDS sweep. The low frequency path (1Hz-40MHz/16Bit) and the radio frequency path (9kHz-20GHz/14Bit) are seamless to the User, except for the particularly noteworthy improvement in the dynamic range.   *In preparation.
+ 999,95€
Option 004: Ultra Low Phase Noise
+ 499,95€
Option 007*: Tracking / IQ DDS Generator (23,5MHz to 6GHz)
 
*In preparation
+ 999,95€
Option 160: 160MHz Real-Time Bandwidth
Extends the Real-time Bandwidth from 88MHz to 160/175MHz.
+ 1998,00€
Option 2x0*: Powermeter (20GHz / 40GHz)
High accuracy internal Power Meter up to 20GHz / 40GHz
*In preparation
+ 499,95 - 1498,00€
Preamplifiers
Preamplifiers (1Hz - 20GHz)
The UBBV series are battery powered preamplifiers, that are compatible to all brands of spectrum analyzers and fit directly on the Aaronia SPECTRAN Handheld analyzer series. Eight different versions cover a frequency range from DC up to 20GHz and offer gain of up to 40dB with very low noise, with and without by-pass functionality. The accurate and specific calibration data of every UBBV preamplifier are saved internally and can be read out via USB.
from 499,95€ Shop
Antennas
Logper Antennas
The HyperLOGs are Aaronia's world-renowned series of high-qualty log-periodic antennas with an extended frequency range of up to 35GHz. An unrivaled bandwidth combined with high directionality and the high gain are the key ingredients for the success of theses antennas. The HyperLOG series is available as active or passive variants.
from 199,95€ Shop
Biconical Antennas
Available as active or passive antennas, the BicoLOGs are the answer when and where ever a biconical antenna is needed. Calibrated starting at 20MHz up to 3GHz, they transform any normal spectrum analyzer into an EMC measurement device for pre-compliance testing.
from 499,95€ Shop
Probes
The Aaronia Probe-Sets are compatible with any spectrum analyzer and enable the pinpoint measurement of interferences from DC up to 9GHz. The delivery scope includes conversion tables and a conversion app, detailed calibration data, 40dB pre-amplifier (PBS 2 only) and a 1m cable. The sets are perfect for the locating of interference sources, measurement of interference field strenghts, injecting fields into circuits to identify those which are EMC-susceptible and the testing of screening and filtering solutions. The sniffer probe sets include a total of 5 EMC probes.
from 1498,-€ Shop
Omnidirectional Antennas
The OmniLOG series was developed as a cost-effective broadband antenna series for omni-directional measurements up to 8GHz. The antennas are small in size, cover frequencies from 300MHz up to 8GHz and have steady gain across the range. Compared to the HyperLOG series, the OmniLOG antennas enables the omni-directional measurement of field-strengths without having to point the antenna at the source. This allows for much faster threshold measurements.
from 99,95€ Shop
3D / Isotropic Antennas
The Aaronia IsoLOG 3D Series is a new and unique development. The IsoLOG 3D antenna-array covers frequencies from 9kHz up to 40GHz and offers pinpoint signal tracking accuracy when combined with a real-time spectrum analyzer. The handy IsoLOG 3D Mobile covers the range from 9kHz up to 6GHz and its main purpose are 3D EMC / EMI measurements.
from 2198,-€ Shop
Horn Antennas
The horn antennas of the PowerLOG series impress through their high input power (up to 500W) and gain of up to 20dBi. The delivery scope of the antennas include a detailed, specific calibration certificate and they can be used for EMC tests, RF emissions measurements and signal transmission. The very wide frequency range from 700MHz up to 40GHz can be covered by the use of only two antennas of this series.
from 1798,-€ Shop
Magnetic Field Antennas
The MDF and Magnotracker series are Aaronia's high quality magnetic field tracking antennas for signal localization and field strength measurements starting from 1Hz. Available in 8 different versions (2 passive, 6 active), the Aaronia magnetic field trackers cover an extremely broad band of frequencies - from 1Hz up to 400MHz.
from 299,95€ Shop
Accessories
50000mAh Power Pack
Portable Powerbank with a capacity of 50.000mAh. Can charge up to four devices simultaneously. With a 20V/3A, a 12V/2,5A, two 5V/2,1A and two 5V/1A connectors.
+ 359,00€ Shop
DC-Blocker (SMA)
The DC-Blocker must be used if you want to measure active powered antennas like GPS or satellite dishes. It prevents the RF-input of the SPECTRAN from being destroyed by the DC-voltages. Simply connect the DC-Blocker to the RF-input of your SPECTRAN and you can measure directly on GPS, satellite antennas or even DSL/ISDN etc. lines.
+ 99,95€ Shop
20dB SMA Attenuator
Expands the measurement range from +20dBm to +40dBm.
+ 149,95€ Shop
Frequency Overview

^

Durch die weitere Nutzung der Seite stimmst du der Verwendung von Cookies zu. Weitere Informationen

Die Cookie-Einstellungen auf dieser Website sind auf "Cookies zulassen" eingestellt, um das beste Surferlebnis zu ermöglichen. Wenn du diese Website ohne Änderung der Cookie-Einstellungen verwendest oder auf "Akzeptieren" klickst, erklärst du sich damit einverstanden.

Schließen