Remote Spectrum Analyzer

SPECTRAN V5 RSA

1Hz - 20GHz | 175MHz RTBW

Shop now

The SPECTRAN V5 RSA is the world’s first remote-controllable spectrum analyzer with 175MHz real-time bandwidth, which can be controlled from anywhere around the globe. Monitor measurements happening hundreds or thousands of kilometers away, on as many locations as you want – without having to leave your desk. Due to the in-built PC, the V5 RSA can also be used locally.

Fernsteuerbarer Echtzeit-Spektrumanalysator SPECTRAN V5 RSA

The unique characteristic defining the V5 RSA is the ability to be remotely controlled from anywhere around the world (internet connection required). This, in combination with the frequency range from 1Hz up to 20GHz and the real-time bandwidth of up to 175MHz, make the RSA perfect for the simultaneous monitoring of measurements in multiple locations. The spectrum analyzer was developed for 19” racks, but can also be used via the integrated PC with a monitor, a mouse and a keyboard.

Highlights
• Remote controllable from anywhere (via network/internet)
• Cascadable system with an unlimited amount of RSAs
• Frequency range from 1Hz up to 20GHz (with low frequency option)
• Real-time bandwidth of up to 175MHz
• Low-noise due to passive cooling
• Real-time and sweep spectrum analyzer in one
• Including software with daily updates
• HF Connector N-female

Remote Control
The SPECTRAN V5 RSA can be remotely controlled via the integrated computer. The PC starts a Linux based server automatically when power is connected to it. The RSA is then, depending on the configuration and setup, remotely accessible via a local network or via the internet and controllable through the RTSA Suite Software. This gives you the ability to connect and monitor as many remote locations as you want, without having to leave your office or lab.

Computer Highlights
• Powerful i5 Processor (optional i7)
• 2 Boot-Partitions (Windows for stand-alone use and Linux for remote use)
• External Power Adapter (exchangeable at any time)
• On and off switchable via remote control
• Up to 32TB Hard-Disk Space (500GB Standard)

Computer
The built-in PC usually boots an automatic, customized Linux distribution, but there is also a Windows-Partition available. When booting the Windows partition, you can control the computer locally with a mouse, keyboard and monitor. You can work with the pre-installed RTSA Suite Software and use it to make measurements and record them. The internal storage for measurements is 500GB and can be expanded up to 32TB optionally.

Options / Accessories
• Powermeter 20GHz / 40GHz
• 5ppb (0,005ppm) OCXO Time-Base
• 1Hz Low-Frequency-Extension
Fitting Preamplifiers, 8 different versions (up to 20GHz)
Great selection of Aaronia antennas
• Additional cooling (+1 height unit)
• SimCard Modem (GSM, 3G, 4G...)
• GPS

Software
The SPECTRAN V5 can be used together with the new, free and included in the delivery RTSA Suite Software via USB 2.0. The RTSA is one of the most powerful and flexible spectrum analysis software-solutions on the market. The software gives you the ability to display and analyze signals in real-time in many different ways. It is under constant development, with many new features being added over time. Daily updates can be found in our download-section.

Made in Germany
Like all devices of the SPECTRAN series, the SPECTRAN V5 RSA spectrum analyzer is developed and assembled in Germany, guaranteeing the highest quality standards.



Versions
Type and Frequency Range Price
HF-8060 V5 RSA
9kHz (1Hz*) - 6GHz
Get a quote
Buy now!
HF-80120 V5 RSA
9kHz (1Hz*) - 12GHz
Get a quote
Buy now!
HF-80160 V5 RSA
9kHz (1Hz*) - 16GHz
Get a quote
Buy now!
HF-80200 V5 RSA
9kHz (1Hz*) - 20GHz
Get a quote
Buy now!
Datasheet Type Frequency Range RTBW Price
HF-8060 V5 RSA9kHz (1Hz*) - 6GHz44MHzGet a quoteBuy now!
HF-80120 V5 RSA9kHz (1Hz*) - 12GHz88MHzGet a quoteBuy now!
HF-80160 V5 RSA9kHz (1Hz*) - 16GHz88MHzGet a quoteBuy now!
HF-80200 V5 RSA9kHz (1Hz*) - 20GHz88MHzGet a quoteBuy now!

Features
  •  Frequency Range from 1Hz up to 20GHz
  •  Up to 175MHz Real-Time Bandwidth
  •  Ability to make measurements on remote locations and control them from a centralized position
  •  Patented Polyphase Filter Technology
  •  Simultaneous surveillance of multiple bands (3G, 4G, WLAN...)
  •  Automatic Triggers Programmable
  •  Saves the need to drive to difficult to reach locations
  •  Incl. "RTSA Suite" Software
Software

With the RTSA Suite PRO there are many ways to display and analyse any received or recorded data. The software is being updated and expanded with new features almost daily.

Echtzeit-Spektrumanalysator Software RTSA Suite

Videos

V5 now offering 175MHz RTBW!

V5 analyzing a DECT phone spectrum

V5 measuring and decoding a car key

More Videos >>





Specifications
 HF-8060 V5 RSAHF-80120 V5 RSAHF-80160 V5 RSAHF-80200 V5 RSA
Frequency Range (min)1Hz (Option 003) / 9kHz (Standard)
Frequency Range (max)6GHz12GHz16GHz20GHz
Real-Time Bandwidth 44MHz (Standard) /
88MHz (Option 080)
88MHz (Standard) /
160/175MHz (Option 160)
88MHz (Standard) /
160/175MHz (Option 160)
88MHz (Standard) /
160/175MHz (Option 160)
Min. Event Duration for 100% POI<1µS
Max. Power at RF input (50 Ohm)+20dBm (Standard) / +33dBm (SMA Attenuator)
DANL (internal pre-amp on)typ. -150dBm/Hz
DANL (with external pre-amp)max. -170dBm/Hz
Amplitude accuracy (typ.)typ. +/- 1,5dB
RF input 50 Ohm (SMA-connector)
Frequency reference accuracy0,5ppm (Standard) / 5ppb (Option 002)
RBW (resolution bandwidth) 1Hz to 3MHz
VBW (video bandwidth)1Hz to 3MHz
DemodulatorAM, FM
Measurement UnitsdBm, dBµV, V/m, A/m, W/m², dBµV/m, W/cm²
DetectorMin, Max, AVG, Peak, QPeak (in preparation)
Attenuator range45dB (0,5dB steps, incl. pre-amp)
TracesACT, AVG, MAX, MIN
Reference range-200dBm to 100dBm
Measurement modesI/Q, Power/Frequency Data
ViewsSpectrum, Persistence Spectrum, Spectrogram / Waterfall, Histogram
TriggerCursor, Measurement, Density
Video RAM32 MB64 MB64 MB64 MB
SDRAM128 MB256 MB 256 MB 256 MB
ADC250MSPS 14Bit500MSPS 14Bit500MSPS 14Bit500MSPS 14Bit
FPGA72K ECP3240K ECP3 240K ECP3 240K ECP3
DSP (Dual Core Blackfin)400 MHz600 MHz600 MHz600 MHz
Temperature Range (Operation) 0 °C to +50 °C
Temperature Range (Storage)-20 °C to +60 °C
Dimensions480 x 370 x 44mm
Weight4,8kg
Power SupplyAC Input: 100-240V, 50-60Hz - DC Output: 5,6V, 5A max
Power Consumption<60W
Country of OriginGermany
Recommended Calibration Interval2 years






Options
Option 020: Internal 20dB Low-Noise Pre-Amplifier
This option provides an internal, super low-noise 20dB Pre-Amplifier, enabling maximum performance particularly when measuring extremely weak signals. It is switched via a true RF switch.
In the scope of delivery
Option 002: 5ppb (0,005ppm) OCXO Timebase
This highly precise OCXO timebase, which has been especially developed for the SPECTRAN®, offers significantly reduced phase noise (jitter). This will allow the use of far narrower filters, which will in turn vastly enhance sensitivity. To fully exploit the maximum sensitivity this option is indispensable! Furthermore, the OCXO timebase allows far more accurate frequency measurement and display.
+ 999,95€
Option 003*: Low Frequency Extension (starting at 1Hz)
Extension of the low frequency range to 1Hz. The input signal is internally diverted to a second RF- path, which is optimised for low frequency processing. The low frequency path offers a frequency range from 1Hz up to 40MHz. This path uses a high-performance 16Bit AD converter with 105MSPS. This resolution enhancement from 14Bit to 16Bit improves the dynamic range from 80dB (14Bit) to 100dB (16Bit), which leaves nothing to be desired. This path is a fully capable Real-Time function controllable by µS DDS sweep. The low frequency path (1Hz-40MHz/16Bit) and the radio frequency path (9kHz-20GHz/14Bit) are seamless to the User, except for the particularly noteworthy improvement in the dynamic range.   *In preparation.
+ 999,95€
Option 004: Ultra Low Phase Noise
+ 499,95€
Option 007*: Tracking / IQ DDS Generator (23,5MHz to 6GHz)
 
*In preparation
+ 999,95€
Option 080: 88MHz Real-Time Bandwidth
Extends the Real-time Bandwidth from 44MHz to 88MHz for the SPECTRAN V5 HF-8060.
+ 499,95€
Option 160: 160MHz Real-Time Bandwidth
Extends the Real-time Bandwidth from 88MHz to 160/175MHz.
+ 1998,00€
Option 2x0*: Powermeter (20GHz / 40GHz)
High accuracy internal Power Meter up to 20GHz / 40GHz
*In preparation
+ 499,95 - 1498,00€
Preamplifier
Preamplifiers (1Hz - 20GHz)
The UBBV series are battery powered preamplifiers, that are compatible to all brands of spectrum analyzers and fit directly on the Aaronia SPECTRAN Handheld analyzer series. Eight different versions cover a frequency range from DC up to 20GHz and offer gain of up to 40dB with very low noise, with and without by-pass functionality. The accurate and specific calibration data of every UBBV preamplifier are saved internally and can be read out via USB.
from 499,95€ Shop
Antennas
Logper Antennas
The HyperLOGs are Aaronia's world-renowned series of high-qualty log-periodic antennas with an extended frequency range of up to 35GHz. An unrivaled bandwidth combined with high directionality and the high gain are the key ingredients for the success of theses antennas. The HyperLOG series is available as active or passive variants.
from 199,95€ Shop
Biconical Antennas
Available as active or passive antennas, the BicoLOGs are the answer when and where ever a biconical antenna is needed. Calibrated starting at 20MHz up to 3GHz, they transform any normal spectrum analyzer into an EMC measurement device for pre-compliance testing.
from 499,95€ Shop
Probes
The Aaronia Probe-Sets are compatible with any spectrum analyzer and enable the pinpoint measurement of interferences from DC up to 9GHz. The delivery scope includes conversion tables and a conversion app, detailed calibration data, 40dB pre-amplifier (PBS 2 only) and a 1m cable. The sets are perfect for the locating of interference sources, measurement of interference field strenghts, injecting fields into circuits to identify those which are EMC-susceptible and the testing of screening and filtering solutions. The sniffer probe sets include a total of 5 EMC probes.
from 1498,-€ Shop
Omnidirectional Antennas
The OmniLOG series was developed as a cost-effective broadband antenna series for omni-directional measurements up to 8GHz. The antennas are small in size, cover frequencies from 300MHz up to 8GHz and have steady gain across the range. Compared to the HyperLOG series, the OmniLOG antennas enables the omni-directional measurement of field-strengths without having to point the antenna at the source. This allows for much faster threshold measurements.
from 99,95€ Shop
3D / Isotropic Antennas
The Aaronia IsoLOG 3D Series is a new and unique development. The IsoLOG 3D antenna-array covers frequencies from 9kHz up to 40GHz and offers pinpoint signal tracking accuracy when combined with a real-time spectrum analyzer. The handy IsoLOG 3D Mobile covers the range from 9kHz up to 6GHz and its main purpose are 3D EMC / EMI measurements.
from 2198,-€ Shop
Horn Antennas
The horn antennas of the PowerLOG series impress through their high input power (up to 500W) and gain of up to 20dBi. The delivery scope of the antennas include a detailed, specific calibration certificate and they can be used for EMC tests, RF emissions measurements and signal transmission. The very wide frequency range from 700MHz up to 40GHz can be covered by the use of only two antennas of this series.
from 1798,-€ Shop
Magnetic Field Antennas
The MDF and Magnotracker series are Aaronia's high quality magnetic field tracking antennas for signal localization and field strength measurements starting from 1Hz. Available in 8 different versions (2 passive, 6 active), the Aaronia magnetic field trackers cover an extremely broad band of frequencies - from 1Hz up to 400MHz.
from 299,95€ Shop
Accessories
Active Differential Probe ADP1 (DC - 40MHz)

Our special Active Differential Probe ADP1 offers a potential free measurement and also expands the measurement range up to 240V. With this probe the signal will not be influenced (potential free measurement). It also protects the SPECTRAN Spectrum Analyzer input against high voltages up to 1400V (CAT3). It's a "must have" for direct cable-measurements on DSL, ADSL, VDSL, free running oszillators, mains etc. Included in delivery is a special grounding kit which protects the unit against static electricity (ESD). This is very important at long time measurements. Power supply is possible with the internal cells (4 x AA, not included) or, at long time measurements, with a mains adapter (included).

       
+ 599,95€ Shop
DC-Blocker (SMA)
The DC-Blocker must be used if you want to measure active powered antennas like GPS or satellite dishes. It prevents the RF-input of the SPECTRAN from being destroyed by the DC-voltages. Simply connect the DC-Blocker to the RF-input of your SPECTRAN and you can measure directly on GPS, satellite antennas or even DSL/ISDN etc. lines.
+ 99,95€ Shop
20dB SMA Attenuator
Expands the measurement range from +20dBm to +40dBm.
+ 149,95€ Shop
Frequency Overview

^

Durch die weitere Nutzung der Seite stimmst du der Verwendung von Cookies zu. Weitere Informationen

Die Cookie-Einstellungen auf dieser Website sind auf "Cookies zulassen" eingestellt, um das beste Surferlebnis zu ermöglichen. Wenn du diese Website ohne Änderung der Cookie-Einstellungen verwendest oder auf "Akzeptieren" klickst, erklärst du sich damit einverstanden.

Schließen